New products
New products
Batteries
- Accessories
- Audio
- Binoculars and Riflescopes
- Cameras and Camcorders
- Cell Phones
- Desktop Computers
- Drones
- Gaming Zone
- Interface Cards and PCBs
- Laptops
- Mining
- Monitors
- Multifunction Centres (Print Scan Copy Fax)
- Multimedia
- Networking
- PC/ Laptop/ Server Components
- POS Devices
- Printers
- Scanners
- Servers
- Software
-
Solar/ Wind Energy and Water Generators
- Batteries
- Battery Inverters
- Cables & Connectors
- Communications
-
Solar Inverters
- Alpha-ESS
- Solar Pump Inverters
- Axpert Inverters
- Deye Solar Inverters
- Fronius Inverters
- Goodwe Inverters
- Infinisolar Grid-tied Inverters
- Imeon Inverters
- Luxpower Inverters
- Kodak Inverters - Off grid & On Grid
- Phocos Inverters
- SMA Inverters
- Solis Inverters
- Schneider Electric
- Sunsynk Inverters
- Victron Energy
- Solar Panels
- Solar Charge Controllers
- Mounting structures
- Wind Turbines
- Load Shedding Solutions - Bundles
- Surveillance
- Storage
- Tablets
- Telephony
- UPSs
- Wireless
RCT SENRY 100AH AGM LEAD ACID BATTERY - FM100A-X
RCT BAT FM100A-X
- lead-lead dioxide
- completely sealed
- maintenance-free
- leak proof and usable in any position
- Design Life 10 Years
- (Exactly the same as 6FM100Z-X)
RCT BAT FM100A-X
RCT SENRY 100AH AGM LEAD ACID BATTERY - FM100A-X
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special oneway valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.
Battery Construction
| Component | Positive plate | Negative plate | Container | Cover | Safety valve | Terminal | Separator | Electrolyte |
| Raw material | Lead dioxide | Lead | ABS | ABS | Rubber | Copper | Fiberglass | Sulfuric acid |
General Features
- Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.
- Not restricted for air transport-complies with IATA/ICAO Special Provision A67.
- UL-recognized component.
- Can be mounted in any orientation.
- Computer designed lead, calcium tin alloy grid for high power density.
- Long service life, float or cyclic applications.
- Maintenance-free operation.
- Low self discharge.
- Case and cover available in both standard and flame retardant ABS.
Dimensions and Weight
| Length (mm) | 330 |
| Width (mm) | 171 |
| Height (mm) | 215 |
| Total Height (mm) | 220 |
| Approx. Weight (Kg) | 30 |
* Weight deviation: ± 3%
Performance Characteristics
| Nominal Voltage | 12V |
| Number of cells | 6 |
| Design Life | 10 years |
| Nominal Capacity 25oC | |
| 10 hour rate (10.0A, 10.8V) | 100Ah |
| 5 hour rate (17.5A, 10.5V) | 79.8Ah |
| 1 hour rate (66.2A, 9.6V) | 65.2Ah |
| Internal Resistance | |
| Fully Charged battery 25oC | ≤5.7mOhms |
| Self-Discharge | |
| 3% of capacity declined per month at 20oC(average) | |
| Operating Temperature Range | |
| Discharge | -20~60oC |
| Charge | -10~60oC |
| Storage | -20~60oC |
| Max. Discharge Current 25oC | 900A(5s) |
| Short Circuit Current | 2100A |
| Charge Methods: Constant Voltage Charge 25oC | |
| Cycle use | 2.40-2.45VPC |
| Maximum charging current | 30A |
| Temperature compensation | -30mV/oC |
| Standby use | 2.20-2.30VPC |
| Temperature compensation | -20mV/oC |
RCT BAT FM100A-X
Reviews
No customer reviews for the moment.
- lead-lead dioxide
- completely sealed
- maintenance-free
- leak proof and usable in any position
- Design Life 10 Years
- (Exactly the same as 6FM100Z-X)