Categories

Manufacturers

Refer-A-Friend
Antaris 5.5 KW Maximize

Wind Turbine Antaris 5.5 KW

  • Antaris 5.5: 
  • Complete grid feed-in system with grid monitoring ENS and turbine control, including heating element 6.0 kW; Including Smart! wind 5.5 3-phase
  • Power inverter; Generator CK 7.5
  • Braking resistor 6.0 kW
  • Repeller diameter 4.00 m

Please note all the inverter system above are without solar panels, solar ground mount structure. And without the Mast for the Repeller.

More details

Antaris 5.5 Kw

R 368,618.00

» Add to my wishlist

Antaris 5.5

Antaris 5.5KW

Technical Specifications ANTARIS 5.5 kW

Generator

  • Permanent-magnet rotor, brushless, gearless, maintenance-free
  • Extremely strong permanent magnets for a high level of efficiency
  • (NdFeBo permanent magnets, resistent to temperatures up to 150° C)
  • Special ball bearings for reliably taking up radial and axial forces
  • 3-phase current
  • Separate rectifier
  • Either direction of rotation
  • Voltage 0-1000 VDC
  • Start of feed-in at approx. 100 rpm
  • Power: 6000 watts at 380 rpm and 400 VDC
  • Evenly rising power curve
  • Weight: 57 kg
  • Aluminium housing, surface cooling, base anchoring
  • Gondola housing in GRP
  • Protection class IP56

 

Rotor

  • Hub connection with aluminium flange and pressure-relief plate
  • Stainless-steel screw connections with locknuts
  • Three rotor blades in Carbon
  • Computer-designed aerodynamic profile
  • Special blade design to minimise noise
  • Approx. 4.00 m in diamater; for low Wind with 4.40 m or 5.30 m diameter up to 10.0 m Mastheight!
  • Weight of each blade: approx. 7.0 kg
  • Dynamically and statically balanced
  • Direction of rotation anticlockwise viewed from front
  • Max. rotational speed 350 rpm
  • GRP spinner cap
  • Rotor colour to client specification

 

Support element comprising:

  • Wind vane (weatherproof HDPE, off-white, slightly transparent)
  • Square hot galvanized steel tube as support element
  • All screw connections in stainless steel and fitted with locknuts
  • Steel bracket as support for generator, configured for plug-in connection with azimuth bearing, fully galvanised
  • Protected by patented rotor-blade positioning system
  • Mast adapter with flange connector (tube 114.3 mm)

 

Storm protection

  • Rotor-blade positioning (“helicopter position”)
  • Voltage monitoring with braking resistance
  • Generator short-circuit

 

Control cabinet

  • Control system with Turbine Power Curve
  • 3-phased grid-feed in with Smart!wind Inverter 5.5 kW;
    optional 1-phased with 1 x Power One PVI 4.5 kW
  • Control electronics with 3-phased turbine controller
  • Connections / plug connectors protected against polarity reversal
  • Controlling of the 3 alternator phases during turbinemode
  • Reset switch with key (removable)
  • Emergency-OFF switch
  • 6.0 kW braking resistance
  • Rectifier, display etc.

The Antaris is, of course, also available as a battery charger, 48 VDC, with a power output of 4000 W. The relevant rotational-speed diagrams for battery charging / grid-connected operation will be included in our quotation.


 

4.5 Murmansk
ANTARIS 5.5 kW


ANTARIS 5.5 kW Power curve

ANTARIS 4.5kW Schallpegelmessung bei 30m Distanz
Sound level measurement from the ANTARIS Windturbine 30m from the mast

Heinemeier 4.5
ANTARIS 5.5 kW Powercontrolling via Webinterface (Turbinepower @ 10.8m/s Windspeed)

 


Cart  

No products

R 0.00 Shipping
R 0.00 Total

Cart Checkout

Search

Visit Bonanza Technologies on ShopMania

Copyright © 2021 Bonanza Technologies. All Rights Reserved. Browse the mobile site

contact