Wind Turbines

Wind Turbine Antaris 12 KW

Antaris 12 Kw
  • Complete grid feed-in system with grid monitoring ENS and turbine control, including heating element 6.0 kW; Including Smart! wind 10.0 3-phase
  • Power inverter; Generator CK 18.0
  • 2 pieces Braking resistor 6.5 kW
  • Repeller diameter 6.50 m

 

Please note all the inverter system above are without solar panels, solar ground mount structure. And without the Mast for the Repeller.

R725,298.00
Tax included

Antaris 12 Kw

Antaris 12KW

Technical Specifications ANTARIS 12.0 kW

Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 6.0 m/sec. we use a repeller with 5.8 m diameter!

Generator

  • Permanent-magnet rotor, brushless, gearless, maintenance-free
  • Extremely strong permanent magnets for a high level of efficiency (NdFeBo permanent magnets, resistent to temperatures up to 150° C)
  • Special ball bearings for reliably taking up radial and axial forces
  • 3-phase current
  • Separate rectifier
  • Either direction of rotation
  • Voltage 0-1000 VDC
  • Start of feed-in at approx. 65 rpm
  • Power: 12.000 watts at 255 rpm and 500 VDC
  • Evenly rising power curve
  • Weight: 160 kg
  • Aluminium housing, surface cooling, base anchoring
  • Protection class IP56

 

Rotor

  • Hub connection with aluminium flange and pressure-relief plate
  • Stainless-steel screw connections with locknuts
  • Three rotor blades in glass-fibre / carbon-fibre laminate
  • Computer-designed aerodynamic profile
  • Winglets on blade tips to minimise noise
  • Approx. 6.50 m diamater (optionally 5.8 m > 6.0 m/s average wind speed)
  • Weight of each blade: approx. 14.0 kg
  • Dynamically and statically balanced
  • Direction of rotation anticlockwise viewed from front
  • Max. rotational speed 255 rpm
  • GRP spinner cap
  • Rotor colour to client specification

 

Support element comprising

  • Wind vane (weatherproof HDPE, off-white, slightly transparent)
  • Square stainless-steel tube as support element
  • All screw connections in stainless steel and fitted with locknuts
  • Steel bracket as support for generator, configured for plug-in connection with azimuth bearing, fully galvanised
  • Protected by patented rotor-blade positioning system
  • Mast adapter with flange connector (tube 220 mm)

 

Storm protection

  • Rotor-blade positioning (“helicopter position”)
  • Voltage monitoring with 18.0 kW braking resistance
  • Generator short-circuit
  • Temperature monitoring from Alternator and Inverter

 

Control cabinet

  • Control system with Turbine Power Curve
  • 3-phased grid-feed in with Smart!wind Inverter 10.0 kW
  • Control electronics with 3-phased turbine controller
  • Connections / plug connectors protected against polarity reversal
  • Controlling of the 3 alternator phases during turbinemode
  • Reset switch with key (removable)
  • Emergency-OFF switch
  • 18.0 kW braking resistance
  • Rectifier, display etc.

Antaris 9.5
ANTARIS 12.0 kW

Größenvergleich ANTARIS 3.5kW und 9.5kW
size difference between ANTARIS 3.5 kW and 12.0 kW

Der Generator CK18 für die ANTARIS 9.5 kW. 11.0 kW @ 255 rpm, max. 22 kW. Leistung satt für höchste Erträge bei Wind, Wasser und BHKWs!
The Alternator CK18 for ANTARIS 12.0 kW. 12.0 kW @ 255 rpm, max. 22 kW. Maximum power for wind, water and CHP!


ANTARIS 12.0 kW Power curve


ANTARIS 12.0 kW production scheme
(Blue = Power per day, Red = Peak Power)

Antaris 12 Kw

You might also like

Reviews

No customer reviews for the moment.

Write your review

Wind Turbine Antaris 12 KW

  • Complete grid feed-in system with grid monitoring ENS and turbine control, including heating element 6.0 kW; Including Smart! wind 10.0 3-phase
  • Power inverter; Generator CK 18.0
  • 2 pieces Braking resistor 6.5 kW
  • Repeller diameter 6.50 m

 

Please note all the inverter system above are without solar panels, solar ground mount structure. And without the Mast for the Repeller.

Write your review